Q: Can I use the iPad power adapter to charge my first-generation iPod touch and second-generation iPod shuffle? I know it is only designed for iPads. Thanks for your help.
– Joshua
A: The short answer is yes. The rule of thumb when dealing with DC power adapters is to ensure that the polarity and voltage matches and that the adapter can supply at least as much current as the electronic device requires. Incorrect voltage or mismatched polarity can damage an electronic device; insufficient current will only result in insufficient power to operate or charge the device.
However, all USB power sources provide 5 volts regardless of whether they are ports on your computer or AC chargers, and both the USB port and Dock Connector are standardized in terms of polarity and can only be plugged in one way. Therefore, your iPad, iPhone and iPod models all use the same voltage and the iPad and iPod adapters supply the same voltage, as do your computer’s USB ports and third-party USB power adapters. Basically, if it’s a USB device, it’s always 5 volts.
However, although all USB devices run at the same voltage, some like the iPad require more power (wattage) than others. Since power is a factor of voltage and current (amperage), and the voltage in this case is a constant, then the charger must be able to supply more current to meet the increased demand for power.
In the case of the iPad, the USB charger is able to provide 2.1A of current (or 10W of power); by comparison, standard computer USB ports normally provide only 0.5A (2.5W), and most USB chargers provide between 1A (5W) and 1.5A (7.5W). Some computer USB ports can provide up to 1.5A expressly for charging purposes, and modern Macs can even provide the 2.1A required for iPad charging on at least some of their USB ports.
Regardless of the current available, however, electronic devices only draw as much as they need. This means that if you connect an iPhone or iPod to an iPad charger, it will still only draw around 1A of current—the charger effectively runs at a lower power level, supplying 5W of charging power. Conversely, when you connect an iPad to an iPhone charger, it will try to get a full 2.1A, but won’t be able to as the charger is only capable of supplying 1A.
